EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: aao-aai at JLAB for RF
From: George Lahti <[email protected]>
To: [email protected]
Date: Thu, 04 May 2000 09:56:40 -0400
These records are used for upload and
download of calibration data to the
embedded RF modules (one module per
RF cavity).

Some of the proposed changes look ok.
I will look at all of the emails again.

These records were developed with only
this one purpose (rf download) in mind.

-- 
Bye --. . .-.. George Lahti


Navigate by Date:
Prev: Re: aao record behaviour Marty Kraimer
Next: Extended talker/listener support in LanGPIB Version 2.4? Eric Norum
Index: 1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: re: Arbitrary waveform generator Frank Lenkszus
Next: CA and arrays Brian McAllister
Index: 1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·