Experimental Physics and
Industrial Control System

> I need to monitor 24 thermocouples.  Can someone suggest EPICS supported
> hardware for this application.  

We have support for the Keithley 2000 Digital Multimeter via RS-232 (Hideos
and MPF).  It has a 9 channel thermocouple plug-in card with an on-board
resistance thermometer for cold-junction compensation.  You would need 3 of
these meters for 24 inputs. There is a 20-channel scanner card, but it does
not have cold-junction compensation as far as I know.  That may or may not be
important for your application.

Mark Rivers

Navigate by Date:

Prev: Hardware to for thermocouple readout Porter, Rodney

Next: Re: Hardware to for thermocouple readout Markus . Janousch

Index: 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: Hardware to for thermocouple readout Steve Lewis

Next: Fast Ethernet and Baja Alastair Borrowman

Index: 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024