Experimental Physics and
Industrial Control System

Dear Tech-Talk
	I need to find a high current (15 mA at +5V) binary output device
to drive a relay.  Typical TTL output devices, like the XYCOM XVME-240, do
not provide enough current at 5V.
	If anybody knows of such a device, and if there is existing EPICS
support for it, that would be excellent.
	I know of one suitable device, the Matrix DO-64 (see a description
at http://www.matrix.com/DO64.html) but I don't know if any support for it
exists in EPICS.
					thanks,
						Steve Pate

()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()
Stephen Pate		Department of Physics		office:   505-646-2135
			Box 30001, Dept. 3D		dept:     505-646-3831
			New Mexico State University	fax:      505-646-1934
[email protected]		Las Cruces NM 88003		home:     505-382-6880

Navigate by Date:

Prev: Re: Switching from a 167 to a 162 Garrett D. Rinehart

Next: Re: in search of: high current binary output device Garrett D. Rinehart

Index: 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: imageRecord Leonard J. Reder

Next: Re: in search of: high current binary output device Garrett D. Rinehart

Index: 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024