Experimental Physics and
Industrial Control System

> To: [email protected]
> Subject: Switching from a 167 to a 162
> MIME-Version: 1.0
> 
> Hi-
> 
>      I had a 167 with a stream of ASCII coming into serial port 2 on the
> 712.  The .st program was accessing from /tyCo/1, and everything worked
> fine.  Recently, the person who was lending me the card asked for it back,
> and returned the 162 that he had been borrowing.  Port 2 is now being used
> to communicate with the card, and I don't know how to get the 162 to
> access the data stream.  Does anybody have any suggestions?
> 
> 						-Dennis
> 

I've done this and the only diff is remembering to use the ports on the front 
of the 162 instead of the 712 for ports 1 and 2.


Garrett Rinehart
Intense Pulsed Neutron Source
Argonne National Laboratory
9700 S. Cass Ave
Argonne, IL  60439
(630)252-6561

Navigate by Date:

Prev: Re: imageRecord Leonard J. Reder

Next: in search of: high current binary output device pate

Index: 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: Switching from a 167 to a 162 Andrew Johnson

Next: vxworks statistics Geoff Savage

Index: 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024