"Dennis M. Reichhold" wrote:
>
> I had a 167 with a stream of ASCII coming into serial port 2 on the
> 712. The .st program was accessing from /tyCo/1, and everything worked
> fine. Recently, the person who was lending me the card asked for it back,
> and returned the 162 that he had been borrowing. Port 2 is now being used
> to communicate with the card, and I don't know how to get the 162 to
> access the data stream. Does anybody have any suggestions?
Dennis,
iosDevShow() will list all the I/O devices that vxWorks knows about. If
you can't see anything there that looks like your serial ports, you'll
have to delve into your mv162 BSP to find out why not.
- Andrew
--
Complexity comes for free, Simplicity you have to work for.
- References:
- Switching from a 167 to a 162 Dennis M. Reichhold
- Navigate by Date:
- Prev:
Re: native type of gdd object Vladimir Sirotenko
- Next:
vxworks statistics Geoff Savage
- Index:
1994
1995
1996
1997
1998
1999
<2000>
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Switching from a 167 to a 162 Dennis M. Reichhold
- Next:
Re: Switching from a 167 to a 162 Garrett D. Rinehart
- Index:
1994
1995
1996
1997
1998
1999
<2000>
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|