g+
g+ Communities
Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  Index 1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014 
<== Date ==> <== Thread ==>

Subject: DL-PC board question
From: john sinclair <sinclair@mail.phy.ornl.gov>
To: tech talk <tech-talk@aps.anl.gov>
Date: Thu, 13 Jan 2000 12:12:25 -0500 (EST)
The DataLink Technologies DL-PC is an ISA board that provides DH+
communication to (as one example) an Allen-Bradley PLC. Does anyone
know if this board runs reliably at 230 Kbaud? When connected to a
PLC 5/20 at this rate, we observe failure within 5 minutes.

Additional info:

  o Cable is short and is properly terminated
  o EPICS version is R3.13.1
  o We are using Jeff Hill's modified serial driver

John Sinclair
sinclair@mail.phy.ornl.gov
Oak Ridge National Lab
865-576-6362   865-574-1268 (fax)


Navigate by Date:
Prev: Re: epics on x86 john sinclair
Next: VxWorks global variable support extension proposal William Lupton
Index: 1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014 
Navigate by Thread:
Prev: epics on x86 john sinclair
Next: RE: DL-PC board question Jeff Hill
Index: 1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICSv4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·