Experimental Physics and
Industrial Control System

> 
> Has anyone compiled and tested R3.13.2 under VxWorks 5.4 with
> the Tornado 2 tools?

I suspect that R3.13.2 is _not_ compatible with Tornado II, but
we could add the necessary enhancements if this is important.

Jeff

> 
> Len
> 
> Janet Anderson wrote:
> > 
> > A new EPICS base release, R3.13.2, is now available.
> > 
> > The R2.13.2 unbuilt gnuzipped tar file can be downloaded from
> > the APS WWW EPICS Software Distribution-Releases-Base page.
> > 
> > http://www.aps.anl.gov/xfd/SoftDist/base.htm
> > 
> > The R3.13.2 release notes are available on the APS WWW EPICS
> > Documentation page.
> > 
> > 
> http://www.aps.anl.gov/asd/controls/epics/EpicsDocumentation/WWWPa
> ges/EpicsDoc.html
> > 
> > Janet
> 
> -- 
> ____________________________________________________
> Leonard J. Reder
> Jet Propulsion Laboratory
> Interferometry Systems and Technology Section 383
> Email: [email protected]
> Phone (Voice): 818-354-3639
> ____________________________________________________
> 

Replies:

Re: New EPICS base release R3.13.2 Leonard J. Reder

References:

Re: New EPICS base release R3.13.2 Leonard J. Reder

Navigate by Date:

Prev: Re: New EPICS base release R3.13.2 Leonard J. Reder

Next: Problems compiling EPICS Coles Sibley

Index: 1994  1995  1996  1997  1998  <1999>  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: New EPICS base release R3.13.2 Leonard J. Reder

Next: Re: New EPICS base release R3.13.2 Leonard J. Reder

Index: 1994  1995  1996  1997  1998  <1999>  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024