Hi,
A colleague is looking into using a picomotors for optical alignment.
We are interested in knowing if anyone has developed EPICS device
support
for the GreenSpring IP-488 industry pack module and the New Focus
8732 multi-axis pico motor controller. The New Focus controller is
a GPIB device and special commands are required to be sent to the
picomotors for positioning.
Also just support for the IP-488 module would be useful. Also have
any of you had particularly bad experience with the Greenspring IP-488
module. I would be interested in knowing about potential problems
with utilizing GPIB.
Any and all replies are greatly appreciated.
Len
--
____________________________________________________
Leonard J. Reder
Jet Propulsion Laboratory
Interferometry Systems and Technology Section 383
Email: [email protected]
Phone (Voice): 818-354-3639
____________________________________________________
- Replies:
- Re: GreenSpring IP488 Industry Pack Support and New Focus 8732 Controller Marty Kraimer
- Re: GreenSpring IP488 Industry Pack Support and New Focus 8732 Controller Al Grippo
- References:
- EPICS collaboration meeting Noboru Yamamoto
- Navigate by Date:
- Prev:
EPICS collaboration meeting Noboru Yamamoto
- Next:
Re: GreenSpring IP488 Industry Pack Support and New Focus 8732 Controller Ned Arnold
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
EPICS collaboration meeting Noboru Yamamoto
- Next:
Re: GreenSpring IP488 Industry Pack Support and New Focus 8732 Controller Marty Kraimer
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|