EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Using GPIB with EPICS
From: Russell Page <[email protected]>
To: tech-talk <[email protected]>
Date: Thu, 09 Dec 1999 14:33:36 -0500
Hello:

I am installing an NI-1014 into a VME crate and wish to have it talk to a DG535
digital delay generator via a GPIB-488 bus, under EPICS. I have the complete
manuals for both the NI-1014 and the DG535. I also have a copy of "GPIB Device
Support" by John Winans (dated 9/93).

When I first attempted this about 2 years ago, I had some problems with the
interfacing (I was using EPICS R3.13.0beta4). I remember using a generic driver
of some kind that allowed me to do some rudimentary communications. I am hoping
someone has done some more work in this area and/or updated some documentation
since then. I really need to get this up and running ASAP. Can anyone out there
assist me?

TIA
Russ Page
MIT - Bates Linac
begin:          vcard
fn:             Russell Page
n:              Page;Russell
org:            MIT -- Bates Linear Accelerator Center
adr;dom:        P.O. Box 846;;;Middleton;MA;01949;
email;internet: [email protected]
title:          SW Engineer / Controls & Instrumentation
tel;work:       (617)  253-9585
tel;fax:        (617)  253-9799
tel;home:       (978)  682-1964
x-mozilla-cpt:  ;0
x-mozilla-html: FALSE
version:        2.1
end:            vcard


Replies:
Re: Using GPIB with EPICS Al Grippo

Navigate by Date:
Prev: Re: Delays in receipt of CA monitors Maren Purves
Next: Re: CA monitors...Update Garrett D. Rinehart
Index: 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: mbboDirectRecord Benjamin Franksen
Next: Re: Using GPIB with EPICS Al Grippo
Index: 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·