Experimental Physics and
Industrial Control System

	We are currently evaluating various types of PLCs for use at the CLS. 
We would like to know which types have EPICS drivers available.  I
currently have a driver for Allen Bradley using df1 protocol over a
serial line.  Though I am unsure if it is a general driver or only
supports specific modules.  I have been unsuccessful in locating
anything for MODICON (Modbus or Modbus+) or Siemens hardware. 
Information about any of these three dirvers would be welcome.


-- 
Tony Wilson                                  e-mail: [email protected]
Canadian Light Source		              Phone: (306) 966-8529
University of Saskatchewan                      FAX: (306) 966-6058
107 North Rd.                            Home phone: (306) 244-1431
Saskatoon
Saskatchewan, Canada
S7N 5C6

Replies:

Re: EPICS drivers for PLCs? DMW Software

Re: EPICS drivers for PLCs? Paul Sichta

Re: EPICS drivers for PLCs? john sinclair

Re: EPICS drivers for PLCs? Graham Waters

Re: EPICS drivers for PLCs? GongFa Liu

Re: EPICS drivers for PLCs? Carl Lionberger

Navigate by Date:

Prev: Re: empty channel field in medm/dm2k Ben-chin K. Cha

Next: RE: empty channel field in medm/dm2k Jeff Hill

Index: 1994  1995  1996  1997  1998  <1999>  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: cvs check out failed. Noboru Yamamoto

Next: Re: EPICS drivers for PLCs? DMW Software

Index: 1994  1995  1996  1997  1998  <1999>  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024