I have recently upgraded some of my mv167s to mv172s with great success.
Now I am trying to upgrade an mv162 to the mv172 and having no luck.
I've got EPICS_3.13.0b11 and some home-brew code (subroutine record stuff)
running on the 162. I'm also using an IPack digital I/O module (Systran
316DIO) and a couple of the serial ports.
I switch over to load up the 172 iocCore and vxWorks. The library stays the
same since it has always been built for the mv167 and the other mv167
libraries carried over directly to the mv172.
It loads up to iocInit and then just seems to hang. Sometimes I get a few
more lines out of the startup script, but that's different each time. Up to
iocInit, everything looks perfectly normal every time. The only thing
really different between this and the mv167s I replaced is the use of the
IPack carrier. I'm assuming something is breaking there. Any ideas?
BTW: I access the IPack module directly from a subroutine (record), not
from an EPICS device layer.
Garrett Rinehart
Intense Pulsed Neutron Source
Argonne National Laboratory
9700 S. Cass Ave
Argonne, IL 60439
(630)252-6561
- Navigate by Date:
- Prev:
Message Passing Facility - Release 1-4 Marty Kraimer
- Next:
Motor record version 3.5 released. Ron Sluiter
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Message Passing Facility - Release 1-4 Marty Kraimer
- Next:
Motor record version 3.5 released. Ron Sluiter
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|