Experimental Physics and
Industrial Control System

> [...] In Germany we have some special
> charater for oe, ue, ae, they have the ASCII value 123,124,125. If I
> used this characters in the DESC field the dbLoadRecord gives some error
> messages like "error in line..." In the US-ASCII-Set 123 and 125 stands
> for { }, are this character not allowed in DESC field ?, which other
> characters are also not allowed ?
> We are using epics 3.13 beta 11.

This behaviour has been changed in beta12. For a complete list of
changes please refer to the "EPICS Release Notes R3.13.0Beta12"
(17-JUN-98). This document is linked to the main EPICS documentation
page at

http://www-csr.bessy.de/asd/controls/epics/EpicsDocumentation/WWWPages/EpicsDoc.html

(or at epics.aps.anl.gov, of course.)


Hope this helps,
Ralph

References:

Character in DESC field Olaf Krebs

Navigate by Date:

Prev: Strange Behavior on 33Mhz MV167 boards Eric Bjorklund, NPSM

Next: possible to write bootrom to flash memory without TFTP? Zheng Lifang

Index: 1994  1995  1996  1997  1998  <1999>  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: Character in DESC field Marty Kraimer

Next: Looking for VxWorks/EPICS driver for VHQ202M HV power supply Dominique Boutigny

Index: 1994  1995  1996  1997  1998  <1999>  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024