Are you sure you have the IACK daisy chain completed on the backplane? If the
source of the interrupt isn't right next to the cpu, the chain can be open. Then
the interrupts are not handled.
Garrett Rinehart
Intense Pulsed Neutron Source
Argonne National Laboratory
9700 S. Cass Ave
Argonne, IL 60439
(630)252-6561
> To: tech-talk <[email protected]>
> Subject: XY240 interrupts
> MIME-Version: 1.0
>
> Hello
> I am currently trying to write some interrupt support for an XYCOM xy240
> I/O board.
> I have used devConnectInterrupt and intConnect to try and connect my ISR
> with the interrupt from this board, to no avail.
> When I input a signal to one of the interrupt inputs on the board, the
> internal registers change properly, but my ISR does not run.
> I suspect that either the board is not generating an interrupt, or that it
> is being ignored somehow.
> If anyone has any suggestions I would love to hear them.
> Thanks
> Liam O Neill
>
- Replies:
- RE: XY240 interrupts Jeff Hill
- Navigate by Date:
- Prev:
XY240 interrupts Liam O Neill
- Next:
Latest EPICS Documentation Leonard J. Reder
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
XY240 interrupts Liam O Neill
- Next:
RE: XY240 interrupts Jeff Hill
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|