Hello
I am currently trying to write some interrupt support for an XYCOM xy240
I/O board.
I have used devConnectInterrupt and intConnect to try and connect my ISR
with the interrupt from this board, to no avail.
When I input a signal to one of the interrupt inputs on the board, the
internal registers change properly, but my ISR does not run.
I suspect that either the board is not generating an interrupt, or that it
is being ignored somehow.
If anyone has any suggestions I would love to hear them.
Thanks
Liam O Neill
- Navigate by Date:
- Prev:
Re: memory problem with MEDM and CA Marty Kraimer
- Next:
Re: XY240 interrupts Garrett D. Rinehart
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: memory problem with MEDM and CA Marty Kraimer
- Next:
Re: XY240 interrupts Garrett D. Rinehart
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|