Hi -
We are using:
* mv167 VME Crate Controller with 4 MB of RAM
* EPICS Version R3.13.0.beta11
* MEDM Version 2.3.4a
and we have the problem that when each MEDM window is launched, a little
bit of IOC memory is allocated by the CA routines to deal with that
particular window. But, for some reason, even when that window is closed,
that memory is not freed. Eventually, because we are allowing various
users to have their own MEDM windows, all of which can be running at any
given time, the IOC memory all but disappears. When MEDM itself is
exited, a small portion of that memory is returned, but it is not nearly
that same amount that was used.
Any clue what is going on and what we should do?
thanks,
Steve Pate
()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()
Stephen Pate Department of Physics office: 505-646-2135
Box 30001, Dept. 3D dept: 505-646-3831
New Mexico State University fax: 505-646-1934
[email protected] Las Cruces NM 88003 home: 505-382-6880
- Replies:
- RE: memory problem with MEDM and CA Jeff Hill
- Navigate by Date:
- Prev:
EPICS base build on Linux at SLS Janousch Markus
- Next:
RE: memory problem with MEDM and CA Jeff Hill
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
EPICS base build on Linux at SLS Janousch Markus
- Next:
RE: memory problem with MEDM and CA Jeff Hill
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|