EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: StripTool-2-4-b6
From: Ron Chestnut <[email protected]>
Date: Wed, 12 May 1999 12:08:51 -0700 (PDT)
If the engineering units for a PV are blank, the configuration is saved with a blank token 
for the UNITS associated with a curve. Loading such a file fails with no error messages. I 
have taken to deleting the offending line so that life continues in the control room.

I can see how to quickly just ignore on input OR not output the Units line; is there a 
newer version of StripTool available? Has this problem been seen and addressed elsewhere?

Thanks in advance.

/Ron Chestnut


Navigate by Date:
Prev: Re: LeCroy 1440 HV support Randy MacLeod
Next: Re: StripTool-2-4-b6 Christopher Larrieu
Index: 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Joining the EPICS Tech-Talk Maria Tzamtzi
Next: Re: StripTool-2-4-b6 Christopher Larrieu
Index: 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·