Subject: |
RE: MV167 serial port |
From: |
[email protected] (Jeff Hill) |
Date: |
Mon, 10 May 1999 09:49:38 -0600 |
On Monday, May 10, 1999 10:13 AM, Philip Taylor [SMTP:[email protected]] wrote:
> Is it possible to use the serial port(s) on an MV167 directly
> from EPICS?
Yes
> I can see there's an EPICS driver called drvSerial
> at Keck - is this, or something else, suitable?
>
The drvSerial code uses the C STDIO library to communicate
so it works with any serial device that has a vxWorks
serial device driver. This code provides only queuing
and framing services. Allen Honey at Keck has a driver which
is layered on drvSerial which can be configured to communicate
with serial devices that communicate over simple command line
ASCII based protocols. There are also a number of drivers for
specific devices which use drvSerial.
Jeff
- Navigate by Date:
- Prev:
Re: gpib device Bill Brown
- Next:
MV167 serial port Philip Taylor
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: gpib device Noboru Yamamoto
- Next:
MV167 serial port Philip Taylor
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|