Experimental Physics and
Industrial Control System

Ron Chestnut wrote:
> 
> Hello,
> 
> Has anybody used this model DCM? The differences between it and that whose support
> we picked up from APS is that it can handle a maximum of 8 16-bit words, not the
> 64 of the APS DCM.
> 
> We figure we'll have to be more economical with the header information and
> basically change 64 to 8 where applicable.
> 
> Any pointers to DCM modifications or hints on necessary changes to Marty's code
> would be appreciated.
> 
> /Ron Chestnut


This sounds very similar to the SLCDCM.
It might be worth trying the SLCDCM support to see if it works.
If not it would be a good starting point.

Marty Kraimer

References:

Alan Bradley model 1747 DCM Ron Chestnut

Navigate by Date:

Prev: RE: Unique Channel Names??? -> redundant CA servers Matthias Clausen DESY -MKS-2/KRYK-

Next: MEDM 2.3.5 Released Ken Evans

Index: 1994  1995  1996  1997  1998  <1999>  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Alan Bradley model 1747 DCM Ron Chestnut

Next: TCL I/F for waveform records Bill Cruise

Index: 1994  1995  1996  1997  1998  <1999>  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024