EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: Slow booting ioc
From: "Garrett D. Rinehart" <[email protected]>
To: [email protected]
Date: Fri, 22 Jan 1999 10:14:12 -0600 (CST)
Thanks again to all who have replied for all the great information.

I have one mv162 among my collection of mv167 SBCs, and I've lived with 
that long symbol table load for a long time. Thanks for the info on using 
rsh to clear that up.

As for the reboot turn-around time, there was some system timeout 
parameter that I set allow faster turnaround with ftp. Will that also 
affect the rsh reboot problem? Also, with ftp, if that timeout was set 
longer than my patience and I tried to reboot too soon, it would just 
fail. Will the rsh wait it out or fail?

-- Garrett


Navigate by Date:
Prev: RE: Slow booting ioc Mark Rivers
Next: Protecting EPICS IOCs on ethernet John A. Priller
Index: 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: Slow booting ioc Mark Rivers
Next: Protecting EPICS IOCs on ethernet John A. Priller
Index: 1994  1995  1996  1997  1998  <19992000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·