Hi Rosemary,
On Thu, 29 Oct 1998, Rosemary Alles wrote:
>
> Is there any way to conditionally process certain output links
> and prevent the processing of others upon a record processing?
>
> In other ways suppose I have a record that is a genSub and I
> want (only) certain output links activated depending on the
> processing of the genSub code - is there a way I can configure
> the record in order to achieve this?
>
Unfortunately, this is not one of the configurable options in the
genSub record. One way of getting records downstream of the
genSub to conditionally process would be to use a fanout with
a mask, choosing the mask according to which link or links that
you want to process. The mask value could be calculated inside the
genSub.
The "wait" record supports conditional processing of its output
link.
Cheers,
Andy
===================================================================================
Andy Foster
Gemini 8-m Telescopes Project Tel: 1 (808) 974 2556 (direct)
Gemini-North Base Facility Fax: 1 (808) 974 9235
670 North A'ohoku Place
University Park E-mail: [email protected] or [email protected]
Hilo Home Page: http://controls.gemini.edu/ajf
Hawaii 96720
USA
- References:
- Conditional processing of links Rosemary Alles
- Navigate by Date:
- Prev:
Conditional processing of links Rosemary Alles
- Next:
Re: A tShell failure which asks for this mail to be sent Marty Kraimer
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Conditional processing of links Rosemary Alles
- Next:
gcc2.8.1 cross compiler for vxWorks under Linux / hpux Till Straumann
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|