I have added the following to the list of supported EPICS hardware maintained
by Steve Lewis at http://csg.lbl.gov/EPICS/Supported.HW.html
VME
Struck
STR7201 32-Channel 200 MHz Multiscaler
GPIB
Newport
MM4000/MM4005 4/8 channel motor controller (DC and stepper)
RS-232
Newport
MM4000/MM4005 4/8 channel motor controller (DC and stepper)
MKS Instruments
HPS 937 Vacuum Gauge Controller
Physical Electronics
Digitel 500/1500 Ion pump controllers
Ethernet/NIM
Canberra Indsutries
AIM 556 Multichannel analyzer (pulse-height analysis and
multichannel scaling)
9615 Programmable NIM spectroscopy amplifier
9635 Programmable NIM ADC
9641 Programmable NIM high voltage power supply
9645 Programmable NIM high voltage power supply
CAMAC
X-Ray Instrumentation Associates
DXP 4-channel DSP based multichannel analyzer
____________________________________________________________
Mark Rivers (773) 702-2279 (office)
CARS (773) 702-9951 (secretary)
Univ. of Chicago (773) 702-5454 (FAX)
5640 S. Ellis Ave. (708) 922-0499 (home)
Chicago, IL 60637 [email protected] (e-mail)
or:
Argonne National Laboratory (630) 252-0422 (office)
Building 434A (630) 252-0405 (lab)
9700 South Cass Avenue (630) 252-1713 (beamline)
Argonne, IL 60439 (630) 252-0443 (FAX)
- Navigate by Date:
- Prev:
RE: Limits problems in MEDM and the Histogram Record Ken Evans
- Next:
Re: Which MEDM mueller
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Limits problems in MEDM and the Histogram Record Ken Evans
- Next:
bug report Jeff Hill
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|