You are right that MEDM only looks for HOPR and LOPR. These are
common to most record types, but apparently the Histogram uses
something else. If you right click on the Cartesian plot in EXECUTE
mode or click on the Axis Data button in the Resource Palette in EDIT
mode, you can set the limits for the Cartesian Plot as you wish. The
Strip Chart is probably not appropriate for a Histogram or other array
type records, anyway.
Work is underway on making the limits now set by HOPR and LOPR to
be optionally definable at design time or run time. This should solve
the problem when the next MEDM version comes out.
-Ken
- Navigate by Date:
- Prev:
Makefile in R3.13beta12 base Steve Lewis
- Next:
RE: Limits problems in MEDM Mark Rivers
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Limits problems in MEDM Mark J. Ryan
- Next:
RE: Limits problems in MEDM Mark Rivers
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|