Hi Kate,
> Does anyone have a device driver for KineticSystems VME 2917 board
> ( interfaces between VMEbus system and CAMAC crates using Model 3922
> parallel bus crate controller)? It did not come with the EPICS source
> code we got. I know CEBAF developed device drivers for HYTEC VSD 2992
> serial highway link. It is quite different from our VME/CAMAC
> interfaces. However, if possible, I would rather not to reinvent
> the wheel.
Yes, Eric Bjorklund form Los Alamos and I have developed a driver which works
with the 2917/3922. You can get my version from
ftp://cars.uchicago/edu/pub/epics/camacApp.tar
This is packaged as an EPICS "application" with all of my CAMAC stuff,
including the driver, generic CAMAC record, device support, etc. in this one
directory tree.
____________________________________________________________
Mark Rivers (773) 702-2279 (office)
CARS (773) 702-9951 (secretary)
Univ. of Chicago (773) 702-5454 (FAX)
5640 S. Ellis Ave. (708) 922-0499 (home)
Chicago, IL 60637 [email protected] (e-mail)
or:
Argonne National Laboratory (630) 252-0422 (office)
Building 434A (630) 252-0405 (lab)
9700 South Cass Avenue (630) 252-1713 (beamline)
Argonne, IL 60439 (630) 252-0443 (FAX)
- Navigate by Date:
- Prev:
Re: Problem building medm2_3_4a on Linux Burkhard W. Kolb
- Next:
Re: device driver for KSC 2917 Mark Rivers
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: device driver for KSC 2917 Kate Feng
- Next:
Re: device driver for KSC 2917 Mark Rivers
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|