Does anyone have a device driver for KineticSystems VME 2917 board
( interfaces between VMEbus system and CAMAC crates using Model 3922
parallel bus crate controller)? It did not come with the EPICS source
code we got. I know CEBAF developed device drivers for HYTEC VSD 2992
serial highway link. It is quite different from our VME/CAMAC
interfaces. However, if possible, I would rather not to reinvent
the wheel.
I am new to EPICS. I subscribed to this list yesterday. I am not sure
if I will receive any response from this list yet. If you have any
response to this question, please kindly forward it to my E-mail address
also. Thanks in advance.
_____________________________________________________________
| S. Kate Feng |
| Brookhaven National Lab. Fax 516-344-3238 |
| National Synchrotron Light Source Email [email protected] |
| Bldg. 725D |
| Upton, New York 11973-5000 |
|_____________________________________________________________|
- Navigate by Date:
- Prev:
Limits problems in MEDM Mark J. Ryan
- Next:
Re: device driver for KSC 2917 Kate Feng
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Limits problems in MEDM Mark Rivers
- Next:
Re: device driver for KSC 2917 Kate Feng
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|