EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  <19981999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  <19981999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: XVME-540 Driver support
From: [email protected] (Allan Honey)
To: [email protected], [email protected]
Cc: [email protected]
Date: Tue, 15 Sep 1998 08:05:41 -1000
> From [email protected] Tue Sep 15 02:13:44 1998
> 
> Dear all,
> 
> 	Does anybody wrote a driver support for the card XVME-540
> and/or XVME-244? If yes I would be grateful for an e-mail.
> 
> 					Regards
> 
> 					Miroslaw Dach
> 


Keck has a driver for the XVME-540 written for us by Matt Needes with
a few mods by me - also uses my extensions to devLib which facilitate
simplification of board config at init time.

You can get the files by:
	ftp ftp.keck.hawaii.edu
	login as anonymous
	cd pub/epics/drivers
	get the files in koDevLib and xy540


Allan


Navigate by Date:
Prev: 3964R protocol for PLCs Korhonen Timo
Next: Re: pop-up menu problems in MEDM 2.3.4a [Resolution] Ken Evans
Index: 1994  1995  1996  1997  <19981999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: XVME-540 Driver support Miroslaw Dach
Next: 3964R protocol for PLCs Korhonen Timo
Index: 1994  1995  1996  1997  <19981999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·