Dear All,
I am trying to us an xy566 (ADC) in "Differential Scanned" mode, feeding
3 volts into one channel.
I get 0 volts in the AI record.
I've been told that all unused channels should be grounded. Can anyone
confirm this? Has anyone had a similar experience to me?
I'm convinced that all the jumpers and switches are set correctly for
Differential Ended, +/-10 volts, gain of 1.
I made the driver print out the values of all the channel memory locations
and they all report 0.0.
Thanks in advance for any help,
Andy
===================================================================================
Andy Foster
Gemini 8-m Telescopes Project Tel: 1 (808) 974 2556 (direct)
Gemini-North Base Facility Fax: 1 (808) 974 9235
670 North A'ohoku Place
University Park E-mail: [email protected] or
Hilo [email protected]
Hawaii 96720
USA
- Navigate by Date:
- Prev:
RE: No C++ Jeff Hill
- Next:
Industry Pac drivers Bob Dalesio
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: No C++ Jeff Hill
- Next:
Industry Pac drivers Bob Dalesio
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|