I want to use multiple VSD_2992 CAMAC Serial Highway drivers in one IOC.
The file 2992.h specifies the VME base address and IRQ stuff for branch 0,
but not the others. I thought I had the info for the other branches, but
can't locate it.
Can someone remind me of where the VMEbus info is, for VSD_2992 branches 1
thru 7 ?
/*
* The following constants are default hardware addresses, and interrupt
* levels for the VSD2992 card.
*/
#define HT2992_ADDRESS 0xDE00 /* Base address for Branch 0 */
#define HT2992_IRQ_LEVEL 3 /* Interrupt Request Level */
#define HT2992_IVEC_BASE 0X80 /* Vector address for Branch 0 */
#define HT2992_NUM_CARDS 7 /* Maximum number of cards */
-ps
- Navigate by Date:
- Prev:
Re: MBBI, SHFT, and GDCT Ralph Lange
- Next:
increasing scan rates Geoff Savage
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: MBBI, SHFT, and GDCT Marty Kraimer
- Next:
increasing scan rates Geoff Savage
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|