Dear Madam/Sir,
I have Solaris5.5.1/ultraSPARC1 and Totnado1.0/VxWorks5.3 for MVME167.
I checked this mvme167 at old vxWorks_5.2 , all work.
Would you can explain to me what is happen?
I prepared following parameters for VxWorks_Boot on mvme167/mc68040
boot ei
processor 0
file /usr/wind/target/config/mvme167/vxWorks
inet(e) 192.168.3.11:ffffff00
host 192.168.3.10
users epics
flags 0x26
target name epics
The loading is successful finish, after starting vxWorks/mvme167
is suspend with message
Starting at 0x20000
tgtsvr report that
Current Log information are available in the file:
/C0T1D0S2/EPICS/R3.13.0.beta11//.wind/launchLog.Mvme167-fel
Command: tgtsvr 192.168.3.11 -L -A -V -n Mvme167-fel
tgtsvr (Mvme167-fel@ultrasparc-fel): Thu Jul 2 11:40:47 1998
Attaching backend... succeeded.
Connecting to target agent...
Error: rpccore backend client RPC: Timed out
failed.
tgtsvr (Mvme167-fel@ultrasparc-fel): Thu Jul 2 11:51:01 1998
Warning: Target Server exiting
FELsparc>
-----------------------
I not understand what I do incorrectly.
Thank you.
Best Regards,
Tatiana
Budker Institute of Nuclear Physics
Lavrentev prospekt 11
630090, Novosibirsk, RUSSIA
fax +7 3832 342163
phone +7 3832 359977
[email protected]
- Navigate by Date:
- Prev:
Re: RS485 and EPICS Allan Honey
- Next:
Access Config File Host Names Paul Sichta
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: RS485 and EPICS Allan Honey
- Next:
Access Config File Host Names Paul Sichta
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|