Torben Lauritsen wrote:
>
> Hi,
>
> I have a problem issuing CNAF control commands using a CES "CBD 8210
> branch driver" from a VxWorks program. Can anyone help?
>
We use this device from mv162's running vxWorks. I have a driver
available (http://sunset.triumf.ca/epics) which may be of some help.
+---------------------------------------------------------------------+
|Graham Waters, Control System Eng Internet: [email protected]|
|TRIUMF --- University of British Columbia, phone: (604)-222-1047 |
|Vancouver, BC, Canada Fax: (604)-222-7307 |
|http://sunset.triumf.ca/homepage/graham01.html |
+---------------------------------------------------------------------+
- References:
- CNAF control commands using a CES "CBD 8210 branch driver" Torben Lauritsen
- Navigate by Date:
- Prev:
CNAF control commands using a CES "CBD 8210 branch driver" Torben Lauritsen
- Next:
Problem booting ioc w/ rsh instead of ftp Hammonds, John
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
CNAF control commands using a CES "CBD 8210 branch driver" Torben Lauritsen
- Next:
Problem booting ioc w/ rsh instead of ftp Hammonds, John
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|