Experimental Physics and
Industrial Control System

Andy Foster <[email protected]> · Tue, 7 Apr 1998 09:21:30 +0100 (BST)

Dear Paul,

On Mon, 6 Apr 1998, Paul Sichta wrote:

> I'm looking for a way to build (and export) a file (for MDS+) which
> includes data from CAMAC arrays (digitizer waveforms) and an assortment of
> (scalar) record fields.  
> 
> 1)  Does the subroutine record handle arrays/waveforms as inputs ?
> 

The standard "sub" record, which is part of EPICS base, does not handle
arrays but the "genSub" record does. The inputs and outputs are user
configurable as arrays or scalars of the standard EPICS types.

You can get this record from:

ftp.ast.cam.ac.uk/pub/ajf/genSub.tar.gz

There are version for 3.12 and 3.13 included in the tar file.

Cheers,

Andy

===================================================================================
Andy Foster
Royal Greenwich Observatory	Tel:       44 (0)1223 374899 (direct)
Madingley Road			Fax:       44 (0)1223 374700
Cambridge			E-mail:    [email protected]
CB3 0HA				Home Page: http://www.ast.cam.ac.uk/~ajf
UK

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System