I'm getting the following problems when running MEDM on my
solaris 2.6 machines:
CA.Client.Diagnostic..............................................
Message: "No internet interface with broadcast available"
Severity: "Warning" Context: "caAdd : ca_build_and_connect failed
"
Source File: ../medmCA.c Line Number: 680
..................................................................
but when I ifconfig -a, I get:
lo0: flags=849<UP,LOOPBACK,RUNNING,MULTICAST> mtu 8232
inet 127.0.0.1 netmask ff000000
hme0: flags=863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST> mtu 1500
inet 206.61.208.109 netmask ffffff00 broadcast 206.61.208.255
the broadcast address is set correctly for a Class C network. I have
seen this problem
on all types of Solaris 2.6 machines (E2 and Ultra30).
Can anyone help with this?
thanks,
Dave Barker.
--
---------------------------------------------------------------
Dave Barker | Tel Office: 509 373 6203 (msg service)
LIGO Hanford Observatory | Lab 0: 509 373 3580
P.O. Box 1970; MS S9-02 | Lab 1: 509 372 3976
Richland | Fax 509 372 2178
WA 99352 | e-mail [email protected]
United States of America | S/W Engineer, UNIX Sys Admin.
---------------------------------------------------------------
- Navigate by Date:
- Prev:
Releasing the source code for CapFast interfaces chong
- Next:
RE: CA broadcast problems on Solaris 2.6? Jeff Hill
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Releasing the source code for CapFast interfaces chong
- Next:
RE: CA broadcast problems on Solaris 2.6? Jeff Hill
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
| 
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·