Thanks Bill for your help.
The John's driver can't work with zero/NULL data, but use EOI ! I've
checked and confirm all, unlucky me!!
I'm searching another way to control the KS3988...
I've found a GPIB-ENET (Ethernet GPIB Controller for
PC's and workstations, by National Instruments). I
don't know if exist device support modules and/or
drivers support for that hardware.
Can you(or EPICS community) give or recommend me a
example for reference?
Thanks in advance!
Mauro.
PS Sorry, but I couldn't search this information in olds tech-talk
emails because the EPICS phrase finder is disabled now.
- References:
- Re: GPIB device test Bill Brown
- Navigate by Date:
- Prev:
Re: EPICS experiences witn M68060 boards Steve Lewis
- Next:
Re: EPICS experiences witn M68060 boards john sinclair
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: GPIB device test Bill Brown
- Next:
Use of the sequencer for run permit calculations Peregrine M. McGehee
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|