Hi everyone.
I'm trying to read all 32 channels of a Xycom 566 into a
waveform record, but I cannot get it to work.
I have tested the board with AI records and it works fine.
When I remove the AI's and put in a WF, it just looks at me
stupidly.
I've got the board configured for SE, -10V to 10V and it's
set up as Card 0.
dbpr reports PACT=0, BUSY=0, RARM=0 (unless I set it, in
which case it stays set), UDF=0, NORD=0, STAT=READ. I've
also got the SCAN set to 1 second.
When I execute "ai_xy566_io_report 1", I get a nice listing
of all 32 channels and they do change (consistently) with
the input voltage I apply. However, when I display memory
starting at the BPTR address, I see 64 bytes (I specified
longs in the WF record) of nice empty space that never
changes.
Anybody know what I'm doing wrong? Want to tell me? Please?
-- Garrett Rinehart
Intense Pulsed Neutron Source
Argonne National Laboratory
- Replies:
- Re: Xycom 566 waveforms Andrew Johnson
- Navigate by Date:
- Prev:
Re: Year 2000 Compliance Glover Barker
- Next:
Re: Xycom 566 waveforms Andrew Johnson
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Year 2000 Compliance Glover Barker
- Next:
Re: Xycom 566 waveforms Andrew Johnson
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|