Experimental Physics and
Industrial Control System

[email protected] (Rozelle Wright) · Thu, 22 Jan 1998 08:52:55 -0700

Is there anyone who can help with this.  We aren't using these devices
here.
Rozelle
----- Begin Included Message -----

>From [email protected] Mon Jan 19 07:17 MST 1998
Date: Mon, 19 Jan 1998 22:20:06 +0800
X-Mailer: Mozilla 4.01 [en] (Win95; I)
MIME-Version: 1.0
To: Rozelle Wright <[email protected]>
Subject: about GPIB interface
X-Priority: 3 (Normal)
References: <[email protected]>
Content-Transfer-Encoding: 7bit
X-Lines: 17

 Hi Rozelle,

Since I have built the EPICS and run a simple example, of course with
your help, I decide to setup a test system with hardware. Because the
VME crate and IP modules we ordered have not arrive yet, I borrowed some
PC-based hardware, a HP82340 HP-IB interface card, a HP 8656B 0.1-990MHz
Signal Generator and a HP 54503A 500 MHz Digitizing Oscilloscope. I
don't know if the exist device support modules and/or drivers support
these hardwares. Also, I am not very clear what I must do  in order to
setup this test system. Can you give or recommend me a example for
reference?

Thanks in advance!

Yours,
Li Jingyi

----- End Included Message -----

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System