g+
g+ Communities
Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  <19981999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  Index 1994  1995  1996  1997  <19981999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014 
<== Date ==> <== Thread ==>

Subject: developing Gpib devSupport
From: mauro <giacchini@lnl.infn.it>
To: tech-talk@aps.anl.gov
Date: Fri, 09 Jan 1998 14:56:45 +0000
I'm using a 3.13.beta11, MV162, GPIB-1014, Keitley 199
and Sun workstation.
I've written my first Gpib device support, it's running well.
Now, with this I can read the DCV but I want add other
Keitley 199 Gpib functions. This is the problem :
when I modify the my devXxK199Gpib.c ( under R3.13.0.b11/
base/src/devOpt), which are the istruction to compile the new
devXxK199Gpib.c and make it in use for my xxxApp ?
 
Probably the solution is use gnumake/gnumake rebuild
commands, but where ?

Thank you.
Mauro.

Navigate by Date:
Prev: Re: EPICS r3.13 fields RTYP/VERS Ralph Lange
Next: SNC bug and question Frank Lenkszus
Index: 1994  1995  1996  1997  <19981999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014 
Navigate by Thread:
Prev: Re: proposed RTYP field Marty Kraimer
Next: SNC bug and question Frank Lenkszus
Index: 1994  1995  1996  1997  <19981999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICSv4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·