We are using the Allen Bradley DF1 serial device support for the
Gemini Enclosure Control System. On booting the IOC we are getting
the following error message at least one in three times.......
iocInit "./data/resource.def"
############################################################################
### @(#)EPICS IOC CORE
### @(#)Version R3.12.2Gem4.1
############################################################################
task: 0Xfaabb8 tShell
Error status (module 1001, number 3) not in symbol table
Unable to install AB serial word IO
0xfaabb8 (tShell): iocInit: All initialization complete
value = 0 = 0x0
Only a re-boot (and the usual graphic expletives) allows us to proceed.
This has been a regular occurrence since we received the initial copy of the
device support code. We have loaded databases with only AbDf1 records
to try and eliminate possible intractions but get the same results.
Has anyone else experienced this problem and, even better, found
a solution???
William Rambold
DAO
- Replies:
- Allen-Bradley serial support Peregrine McGehee
- Navigate by Date:
- Prev:
CA Client Messages from the dbCA task handling record links between IOCs saa
- Next:
Allen-Bradley serial support Peregrine McGehee
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
CA Client Messages from the dbCA task handling record links between IOCs saa
- Next:
Allen-Bradley serial support Peregrine McGehee
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|