EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  <19971998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  <19971998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: ACS Microstepper Drives
From: [email protected] (Pete Jemian)
To: [email protected]
Date: Wed, 11 Jun 97 09:56:26 CDT
Guy Jennings wrote:
> Just ran into a potential gotcha with the ACS SPD-3M Microstepper motor
> drive module.  It is NOT a drop-in replacement for the SPD-6U
> drive!!!  The SPD-3M is a bipolar drive and needs different connections
> when used with a 6-wire motor.
> Users beware!!!

I, too, did not have any trouble using the ACS microstepper as a drop-in
replacement for the ACS full/half drive.

Motors tested were Vexta PX245 and an Aerotech motor.

Pete Jemian
UNICAT



Navigate by Date:
Prev: Re: IOC hangs (scanOnce crashes) Marty Kraimer
Next: [no subject] Guy Jennings
Index: 1994  1995  1996  <19971998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: ACS Microstepper Drives jennings
Next: [Fwd: ACS Microstepper Drives] jennings
Index: 1994  1995  1996  <19971998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·