Ben wrote...
> We are looking for hardware (VMEbus card preferred) that can
> simultaneously control (at least) two stepper motor axes while providing
> continous positional feedback.
> Has anybody heard of such a thing (company, model, ...)?
Epics has support for the Oregon Micro Systems(OMS) VME-8 and -44 and the
VME58-8 and -4E. These are stepper motor controllers that can handle 8
motors with no encoders or 4 motors with encoders.
Look on the APS Beamline Controls Group supported hardware list for more
information....
http://www.aps.anl.gov/xfd/WWW/xfd/bcda/Documents/bcda_hardware.html
Joe
----------------------------------------------------------------------
Joseph Sullivan Phone: (630) 252-8657
Experimental Facilities Division Email: [email protected]
Argonne National Laboratory Fax: (630) 252-9303
9700 S. Cass Ave. Bldg. 401
Argonne, IL 60439-4844
- Navigate by Date:
- Prev:
Serial Ports on MVME167 Card Guy_Jennings
- Next:
subArray record Rolf Keitel
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Continous feedback control for stepper motors Benjamin Franksen
- Next:
DB initialization Marian ZUREK
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
| 
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·