EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  <19971998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  <19971998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: VxWorks 5.3
From: [email protected] (Steve Lewis)
To: [email protected], [email protected]
Date: Wed, 30 Apr 97 13:18:32 PDT
> Can iocCore built for 5.2 run under vxworks 5.3 ?

I have loaded several 5.2 objects into 5.3 with no problems,
so go ahead and try it.  HOWEVER, see my next remark... 



> What are the problems with using 5.3 at the moment ?

If you configure the kernel (target/config/configAll.h) with the
new option "INCLUDE_5_2" to give you back the shell and symbol
table; and with the other options (POSIX, ANSI, etc) as usual, you
should have no problems whatever.

Tried on mv147, mv167, mv177

Navigate by Date:
Prev: VxWorks 5.3 Steve Hunt
Next: Re: VxWorks 5.3 Steve Hunt
Index: 1994  1995  1996  <19971998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: VxWorks 5.3 Steve Hunt
Next: Re: VxWorks 5.3 Steve Hunt
Index: 1994  1995  1996  <19971998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·