Add more info:
we are using sequencer v1.8.3 and EPICS 3.12.2 for the following
iocs at Jefferson Lab.
>
> Here's a typical problem at Jefferson Lab (taken from log):
>
> The global sequence on iocin1 claimed the signals from iocin3 and iocwa4
> were monitored but not connected even though the iocs were indeed up and
> the signals reachable by caget. iocin3 and iocwa4 also were not providing
> signals to iocin1. The solution was to reboot iocin1 to force the se-
> quence to re-establish connections to various viewer iocs. Rebooting the
> data source (iocin3 or iocwa4) did not fix the problem.
>
> Anyone have any suggestions for how to find or fix this?
>
> Regards,
>
> Chip
>
> -----------------------------------------------------------------------------
> Chip Watson
> Internet: [email protected] Thomas Jefferson National Accelerator Facility *
> Tel: (757) 269-7101 12000 Jefferson Avenue, MS 12A2
> FAX: (757) 269-5024 Newport News, VA 23606
> WWW: http://www.jlab.org/~watson/
> * (formerly CEBAF, the Continuous Electron Beam Accelerator Facility)
>
>
>
--
Johnny Tang Tel: (757)269-7239 E-mail: [email protected]
Jefferson Lab
12000 Jefferson Avenue, MS 85A
Newport News, Virginia 23606
__________________________________________________________
- Navigate by Date:
- Prev:
ioc re-connect problem Chip Watson
- Next:
ioc re-connect problem (additional info) Matt Bickley
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: ioc re-connect problem Jeff Hill
- Next:
ioc re-connect problem (additional info) Matt Bickley
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|