Experimental Physics and
Industrial Control System

At BaBar we plan to use VME crates which have a CAN bus interface.  Through
this interface one can (from an interface in another VME crate) do a system
reset or cycle the power.  Also control fan speeds (for what that is worth),
and check power supply voltages.

We're using the Andrew Johnson EPICS CAN driver.

	Carl

> 
> At APS they used specialized hardware to provide remote access to the VME
> system reset via a terminal server (via a special character sequence
> recognized by this hardware).
> 
> Jeff
> 

-- 
//
// Carl Lionberger				[email protected]
// Computer System Engineer			Voice 	(510) 486-7503
// Berkeley National Laboratory			Fax 	(510) 486-4047
//

References:

Re: Rebooting an IOC Jeff Hill

Navigate by Date:

Prev: Re: Rebooting an IOC Allan Honey

Next: NFS mounting and channel access Ralph Quan

Index: 1994  1995  1996  <1997>  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: Rebooting an IOC Carl Lionberger

Next: Re: Rebooting an IOC Bill McDowell

Index: 1994  1995  1996  <1997>  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024