I have just discovered the VxWorks "checkStack" command and find that
after loading my system, bringing up a couple of dm screens and setting a
couple of process variables one of the lines of output from checkStack
reads:
CA client _camsgtask fff138 4760 264 4760 0 OVERFLOW
Should I be worried by this ? If so, what can I do about it ?
I also believe that I am overflowing the stack in a subroutine attached to
a subroutine record that is being scanned periodically. How can I increase
the stack for a scan task ?
(I am using Epics 3.12.2)
===============================================================
David Terrett Space Science Department
Rutherford Appleton Laboratory
[email protected] Chilton, Didcot
Oxfordshire
Tel: +44-1235-446478 OX11 0QX
Fax: +44-1235-445848 United Kingdom
- Replies:
- Re: Stack overflows Jeff Hill
- References:
- edd 2.2, Solaris 2.5 and Sun patch 103210-09 Andrew Johnson
- Navigate by Date:
- Prev:
Re: EPICS addr list problem. Jeff Hill
- Next:
Re: Stack overflows Jeff Hill
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
edd 2.2, Solaris 2.5 and Sun patch 103210-09 Andrew Johnson
- Next:
Re: Stack overflows Jeff Hill
- Index:
1994
1995
1996
<1997>
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|