Experimental Physics and
Industrial Control System

"Jim B. Kowalkowski" <[email protected]> · Tue, 04 Mar 1997 13:35:05 -0600

Hello everyone,

I'm setting up a MVME177 to run vxWorks here at Argonne.  I got the
BSP from WindRivers and installed it.  When I boot from
a Sun OS 4.1.3 host it works, when I boot from a Sun Solaris 2.5.1
host the vxWorks image loads (using ftp) and the vxWorks.sym
file download fails with a 0x1a9.

The code that does the download for the MVME177 is the same as the
MVME167 - it invokes ftpXfer().  The 177 ftpXfer() fails and
the 167 ftpXfer() works fine.  I think there is a problem in ftpXfer()
when it attempts to reconnect to a port on the Solaris host to
transfer vxWorks.sym and the port is still busy from the vxWorks file
download.

Has anyone experienced a similar problem?  If so, how did you
resolve it?

Jim

-- 
Jim Kowalkowski
630/252-9410
[email protected]

Argonne National Laboratory
Advanced Photon Source - Accelerator Systems Division
Controls and Computing

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System