Experimental Physics and
Industrial Control System

> From [email protected] Wed Dec 18 12:28:19 1996
> Return-Path: <[email protected]>
> Date: Wed, 18 Dec 96 11:28:18 PST
> To: [email protected]
> Subject: Re: Bug in sequencer?
> Content-Length: 292
> X-Lines: 7
> 
> > We have fixed it and Jeff Hill has checked the code in to R3.13 at APS.
> 
> Rozelle, could you send me the diff (I am guessing it is very short)? I
> am not ready to switch to 3.13-- I have many, many 3.12.2 sites in
> production.  You might consider an official patch to 3.12.2 as well.
> 
> --Steve
> 
Hi Steve,
We have put the change into R3.12.2.patches and made sure that it
still builds and is useable.
The diffs are very minor.

diff gen_tables.c ../sequencer.old/gen_tables.c
365c365
<               printf("\t/* ptr to state block */ state_%s,\n", ssp->value);
---
>               printf("\t/* ptr to state block */ state_%s%,\n", ssp->value);


Rozelle

Navigate by Date:

Prev: soft device support for aai and aao records? William Lupton

Next: Re: Standard IOC Benchmarks? Noboru Yamamoto

Index: 1994  1995  <1996>  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: Bug in sequencer? Rozelle Wright

Next: User's Guide on EPICS build system Claude Saunders

Index: 1994  1995  <1996>  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024