Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  <19961997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  Index 1994  1995  <19961997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017 
<== Date ==> <== Thread ==>

Subject: Re: [Q] CAMAC Serial Driver.
From: watson@cebaf.gov
To: Mark Rivers <RIVERS@cars3.uchicago.edu>
Cc: watson@CEBAF.GOV, TECH-TALK@aps.anl.gov
Date: Fri, 14 Jun 96 08:54:38 -0400
>I believe this hardware independence has been preserved. I have loaded the
>latest EPICS CAMAC package onto an IOC which was running only vxWorks (and not
>EPICS) and it runs fine.

Not exactly my point.  Can you load EPICS with a CAMAC library from CERN
with no modifications and then use (for example) a CES branch highway 
interface?

Chip


References:
Re: [Q] CAMAC Serial Driver. Mark Rivers

Navigate by Date:
Prev: Re: [Q] CAMAC Serial Driver. Mark Rivers
Next: Re: [Q] CAMAC Serial Driver. Johnny Tang
Index: 1994  1995  <19961997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017 
Navigate by Thread:
Prev: Re: [Q] CAMAC Serial Driver. Mark Rivers
Next: oops Paul Banta
Index: 1994  1995  <19961997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·