I've connected the PACT field (via a user defined leg) of one record to
the SDIS input of another to temporarily stop it processing. It seems to
work but...
1: I can't monitor the PACT leg with either probe or cau etc, nothing can
connect to it, so it is impossible to verify its operation.
2: If the record is actively processing, say every 10 seconds, then it
seems to count the number of times it should have activated whilst it is
disabled and then, when it is re-enabled, it seems to process n
times without a 10 second wait between each. Ie, if it was disabled for 60
seconds then when it is re-enabled, it processes at least twice, perhaps
6 times, instantaneously. The record behaves itself if it is passive.
Any thoughts would be appreciated.
cheers
Ian A Smith Telephone: +44 (0) 131 668 8257
Royal Observatory Fax: +44 (0) 131 668 1130
Blackford Hill Web: http://www.roe.ac.uk/
Edinburgh
EH9 3HJ
UK
- Navigate by Date:
- Prev:
RE: EPICS archive to DADiSP format? Matthias Clausen DESY -MKV2/KRYK-
- Next:
Re: macro substitution (forwarded from Marty) William Lupton
- Index:
1994
1995
<1996>
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
EPICS support for Precision Micro Control products? Paul Stomski
- Next:
Re: PACT -> SDIS Marty Kraimer
- Index:
1994
1995
<1996>
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|