EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: CAN connection
From: [email protected] (Gabor Csuka)
To: [email protected]
Cc: [email protected]
Date: Fri, 27 Oct 1995 12:43:46 +0100 (MET)
Dear All,

The CAN bus now successfully connected to Epics (R3.12.1),
useing CDI V4.0 interface.

The meaning of it:

supportted records: ai, ao (mbbi and mbbo planned)
supported hw:	TIP810 IP board from TEWS DATENTECHNIK.
		(with CANBUS-Controller PCA82C200)

requiroment:	CDI V4.0 


up-to-date description, papars will be available soon, 
(I will announce it.)  and the source will be available for 
the Epics community too. 

Regards,
Gabor Csuka
---
DESY, Germany
email: [email protected]


Navigate by Date:
Prev: Re: Subroutine record input fields don't get archived Marty Kraimer
Next: Re: Subroutine Records Gordon Uchenick
Index: 1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: "mosub" Andy Foster
Next: Re: CAN connection Andrew Johnson
Index: 1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·