EPICS default.dctsdr => all ascii file

Experimental Physics and Industrial Control System

1994 <1995> 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 <1995> 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	default.dctsdr => all ascii file
From:	[email protected] (Marty Kraimer)
To:	[email protected]
Date:	Wed, 11 Oct 1995 14:31:46 -0500

This morning I successfully ran a ioc that loaded all menu, record, etc
definitions via ascii files rather than using default.dctsdr.
Since a LOT of code had to be changed, added, and thrown away in
order to reach this point this was a rather major milestone.
Of course I still have a lot of testing to perform and also have
to update documentation.

At the upcoming EPICS meeting I will give an overview of the new system.
After release 3.12.2 becomes official (soon) I will fold all my
changes into the development tree at APS. I will then welcome some
beta testers. This should happen about mid November.

Marty Kraimer

Navigate by Date:: Prev: 167 EPROMS Bill Brown; Next: re: structures and 2dimension arrays Matthias Clausen DESY -MKV2/KRYK-; Index: 1994 <1995> 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: CA clients Jeff Hill; Next: High speed A/D Bob Dalesio; Index: 1994 <1995> 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024