Experimental Physics and
Industrial Control System

=============================================================
Johnny Tang     Voice: (804)249-7239  E-Mail: [email protected]
Continous Electron Beam Accelerator Facility
12000 Jefferson Avernue, MS 85A
Newport News, Va 23606
=============================================================
Mailer: Elm [revision: 70.85]

> 
> 
> In answer to the following comment
> 
> >   With the current set up, to be able to build epics system
> > for a target, we have to successfully build the system for
> > a host first.
> > 
> >   With Janet's proposal, I hope, the above probelm can be 
> > resolved easily.
> 
> Building for the host first won't change with what I have proposed 
> because the tools antelope, e_flex, and the proposed installEpics
> have to be built for the host before they can be used in building
> the target archs.
> 
  It would be better to build antelope, e_flex in a pre epics system
build stage, so that to build any target arch won't depend on the
host epics system being built.

  We can manually achieve the above with the current setting up though.

  Johnny

References:

Building for more than one host architecture Janet B. Anderson

Navigate by Date:

Prev: Building for more than one host architecture Janet B. Anderson

Next: Re: REMOTE DEVELOPER NOTICE Matthew Needes (LANL)

Index: 1994  <1995>  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Building for more than one host architecture Janet B. Anderson

Next: Building for more than one host architecture Janet B. Anderson

Index: 1994  <1995>  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024