EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: compumotors
From: [email protected] (Rozelle Wright)
To: [email protected]
Cc: [email protected]
Date: Fri, 2 Jun 95 16:40:46 MDT
I have been helping with an old application at Boeing
which has been ported to EPICS 3.11.  They have two
Compumotor 1830 stepper motors which worked fine a couple
of years ago with a much earlier version of EPICS and now
no longer work.  The problem turned out to be a change in
the number of parameters for the driver.

In the routine drvCompuSm.c, the previous calling
sequence was 
compu_driver(card,value_flag,arg1,arg2).

The correct calling sequence now is
compu_driver(card, channel, value_flag,arg1,arg2)



Navigate by Date:
Prev: AR tool MONITOR: round stamps option Kevin Tsubota
Next: Re: EPICS hosts and targets Muranaka Masaki
Index: 1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: AR tool MONITOR: round stamps option Bob Dalesio
Next: UK mirror for EPICS documentation? David F. Buscher
Index: 1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·